Carrier Hotspot Detection & TTL for 4G/5G Proxies
Carriers spot tethering by the hop counter (TTL) of each packet. A phone sends 64; a laptop behind its hotspot arrives with one less. Some plans then slow down or block the SIM. The TTL Setting makes your proxy traffic look like it comes from the device itself.
You need: any plan. TTL is off by default.
In short
Every router on the way lowers the TTL by one. A lower value than a phone sends means "hotspot".
The box rewrites the TTL of every packet that goes to the modems.
With TCP OS Spoofing on, the profile's TTL (128 for Windows, 64 for Apple) wins.
Set it up
Step 1 of 2
Open General Settings → System Setting, tab System, and find TTL Setting.
- Turn on Enable TTL 1.
- Pick a TTL Preset 2. Windows profiles: 128 — Windows PC, the panel's recommendation. Phone profiles: 65. The TTL Number follows.
- Click Save. It applies at once.
Which preset to pick
| Preset | Panel name | Use it when |
|---|---|---|
128 | Windows PC | The panel's recommendation. It no longer looks like a phone minus one hop, and it matches a Windows browser profile. |
65 | Smartphone via NAT dongle | Phone profiles. The router-style dongle subtracts one hop, so the carrier sees 64: exactly a phone. |
129 | Windows via NAT dongle | Windows profiles behind a router-style dongle that subtracts one hop. |
64 | Standard Linux / Direct IP | The box default. Fine when the carrier does not limit tethering. |
| Custom | Custom | Your carrier needs another value. Type any number from 1 to 255. |
TTL and TCP OS Spoofing together
Websites read the TTL too: Windows starts at 128, Apple, Android and Linux at 64. TCP OS Spoofing already sets the right start value for the profile you pick, so the two never fight:
- A modem with a TCP/OS profile uses the profile's TTL. The TTL Setting only adds the hop of a router-style dongle, if any.
- A modem without a profile uses the TTL Setting.
Run Check anonymity after a change: the Connection kept intact line shows the TTL websites receive.
Troubleshooting
| Symptom | Fix |
|---|---|
| The carrier still slows the SIM after a few GB | The plan has a hard data cap, or the carrier also checks traffic patterns. Try the other preset (65 instead of 128, or back), or ask the carrier about the plan. |
| Check anonymity: "Connection kept intact" fails | Something between the modem and the website (a router-style dongle or the carrier network) rebuilds the connection. Try the same profile on another modem or SIM to see which one it is. |
| No change after Save | Check that Enable TTL is on and that the dongle does not have its own TTL in Device Settings. |
FAQ
Does the TTL Setting stop every hotspot limit?
No. It hides the hop counter, which is the most common check. A plan with a hard data cap, or a carrier that also checks traffic patterns, can still slow the SIM.
Which plan do I need?
Any plan, Free included. TTL is off until you turn it on in System Setting.
Can one dongle use a different TTL?
Yes. Give it its own preset in Device Settings → Dongle Devices → Setting. 0 means it uses the box value.
What next?
Test everything at once on a modem.

