Skip to content

Integrating GoLogin with XProxy

Ask AI

Ready taskDo it with me, step by step

Chat assistants

Open in ChatGPTNew tabOpen in ClaudeNew tab

Coding agents

Claude CodeOpens the desktop appCodexOpens the desktop appCursorOpens the app from the web

Copy

View as MarkdownPlain text for AI tools
See the prompt
Read https://xproxy.io/document/integrating-gologin-with-xproxy.md, the XProxy guide "Integrating GoLogin with XProxy". If you cannot open links, download them with curl. Then take me through it one step at a time: tell me exactly what to click or type, wait until I say it is done, and help me when what I see is different from the guide. Start by asking what I have (hardware, XProxy version, what I see now).
Other XProxy guides, each with a Markdown copy at its URL + .md, are listed in https://xproxy.io/llms.txt.

The app opens with the prompt filled in. Nothing runs until you press Enter.

Use an XProxy mobile proxy in GoLogin. Copy it from your panel, paste it into a profile and check it. It takes about 5 minutes.

You need: an XProxy panel with a working modem, and GoLogin on your computer. GoLogin can run on another computer than XProxy: choose Public address or VPS relay when you export.

Step 1 of 7

Open Export Proxy in your XProxy panel

Open your XProxy panel in a browser and click Proxy Management in the left menu.

Click Export Proxy 1.

Can't open the panel? See how to open your dashboard.

Something not working?

You seeWhat to do
GoLogin says the proxy does not work, or times outCheck that your computer can reach the address in the line. A LAN only address works only on your own network: export again with Public address or VPS relay (public access). Also check that the port is the one shown in Proxy Management.
Login failed, or "407 Proxy Authentication Required"Copy the proxy again after saving Proxy Settings → Login, and check for spaces before or after the text. Using Whitelist IP instead of a password? Add the public IP of the computer that runs the app.
The proxy connects right after you paste it, then failsThe type in the app must match what you exported. The GoLogin / AdsPower preset is HTTP, the Multilogin / VMLogin preset is SOCKS5. Or export again with the other Protocol.
The test page shows your own IPThe profile is not using the proxy. Open its proxy settings, make sure the proxy is selected, and set WebRTC to Replace or Disabled. Test again at the XProxy leak test.
The rotation link does nothing, or the IP stays the sameThe modem needs a few seconds to reconnect, so wait about 10 seconds. Sometimes the carrier gives back the same IP: rotate again. Paste the link in a browser tab: it should answer command_sent. Profiles that share one proxy share its IP too, so rotating changes it for all of them.
There is no Change IP button for the proxyEdit the proxy and check that the Change IP field holds the rotation link. You can always rotate from Proxy Management in XProxy.
Still stuck?A technician can look at your device with a one-time PIN, or chat with us on Telegram.