Installing the XCPE Kit

Other kits:XH22XM16XM55XCPEXLE5Which kit do I have?

Set up your XCPE Kit in 9 short steps, about 30 minutes from the box to working proxies. Drag the 3D view to look from any side.

You need: the kit, one SIM with mobile data for each XCPE, and a router or modem that is online and has a free LAN port.

Set it up

1. 1Meet your kit
2. 2Put a SIM and the antennas on the first XCPE
3. 3Do the same on the other XCPEs
4. 4Power on the switch and the XProxy box
5. 5Connect the first XCPE to the switch
6. 6Connect the other XCPEs to the switch
7. 7Connect the switch to your router
8. 8Connect the XProxy box to the switch
9. 9Check the lights

Show in 3D · 2.5 MB

Step 1 of 9

Meet your kit

Here is everything on one desk. Tap a part to look at it.

In the box

• 1XCPE modemsOne proxy each, as many as you ordered, with 4 antennas each
• 2Network switchJoins everything with network cables
• 3Switch adapterPowers the switch
• 4XProxy boxRuns your proxies
• 5XProxy box adapterPowers the XProxy box
• 6Network cablesOne for each XCPE, one for your router, one for the XProxy box

Not in the box (you provide)

• 7Your routerNot included, must be online
• 8Your power stripNot included, two free sockets

You also need one standard-size SIM (2FF, not micro or nano) with mobile data for each XCPE.

← BackNext →

Something not working?

You see	What to do
No light on the switch	Check the switch's adapter is plugged into the switch and into your power strip, and the strip is switched on.
A switch port light stays off	Push both ends of that network cable in firmly, or try another free port on the switch.
An XCPE has no mobile signal	Check all 4 antennas are screwed on and the SIM is pushed all the way in.
The XProxy box does not show up	Check the XProxy box adapter, and that the cable from the box goes to the switch and the cable from the switch goes to your online router.