# Integrating GoLogin with XProxy

> For AI tools: this is the Markdown copy of https://xproxy.io/document/integrating-gologin-with-xproxy. Every XProxy guide has one at its URL + `.md`; the index of all guides is https://xproxy.io/llms.txt.

Learn how to configure XProxy SOCKS5/HTTP proxies in GoLogin.

Use an XProxy mobile proxy in GoLogin. Copy it from your panel, paste it into a profile and check it. It takes about 5 minutes.

**You need:** an XProxy panel with a working modem, and GoLogin on your computer. GoLogin can run on another computer than XProxy: choose **Public address** or **VPS relay** when you export.

**Step 1: Open Export Proxy in your XProxy panel**

Open your XProxy panel in a browser and click **Proxy Management** in the left menu.

Click **Export Proxy**.

![XProxy panel, Proxy Management page with the Export Proxy button marked (demo data)](https://media1.xproxy.io/docs/integrations/int-export-1-v1.webp)

> Can't open the panel? See [how to open your dashboard](https://xproxy.io/document/how-access-dashboard-xproxy).

**Step 2: Copy your proxies**

1. Next to **Preset**, pick **GoLogin / AdsPower**. It uses **HTTP**. Each line is one proxy: `host:port:user:pass`.
2. Under **Address**, pick how GoLogin reaches your box: **LAN only** on the same network, **Public address** or **VPS relay** from anywhere else.
3. Click **Copy All**.

**user** and **pass** are your login from **Proxy Settings → Login**.

![Export Proxies window with the Preset list, the Address list and the Copy All button marked (demo data)](https://media1.xproxy.io/docs/integrations/int-export-2-v1.webp)

> Only need one proxy? Click it in the table: it copies in the same format. Not sure which address? See [how to copy a proxy](https://xproxy.io/document/how-use-proxy-format-http-socks5).

**Step 3: Copy the rotation link**

Want GoLogin to change the IP for you? In the table, click **LINK** in the **Rotation** column of the same proxy. The link is copied.

Opening that link makes the modem reconnect and get a new IP. You will paste it into GoLogin in the next step. Not needed? Skip the paste.

![Proxy Management table with the LINK button in the Rotation column marked (demo data)](https://media1.xproxy.io/docs/integrations/int-rotlink-v1.webp)

> The link starts with your panel address. Using GoLogin from another network? Set a public address first. See [how to change / rotate IP](https://xproxy.io/document/how-change-rotate-ip).

**Step 4: Add the proxy to a profile**

In GoLogin open the proxy form of a profile: click the **+** in the **Proxy &amp; Location** column of its row.

1. Set **Type** to **HTTP**.
2. Type the address and the port in **Host**.
3. Type the username in **Login** and the password in **Password**.
4. Scroll down in the form to **Change IP** and paste the rotation link.
5. Click **Connect**.

![GoLogin proxy form: Type, Host with port, and Login with Password marked](https://media1.xproxy.io/docs/integrations/app-gologin-v1.webp)

> Prefer SOCKS5? Export again with **Protocol: SOCKS5** and set **Type** to **SOCKS5**.

**Step 5: Many proxies? Import them**

Have many modems? Add all your proxies at once.

1. Copy the whole list from **Export Proxy** (step 2).
2. In GoLogin open **Proxies** in the left menu and click **Import Proxies**.
3. Paste the list. One proxy per line, like `192.168.1.10:4001:demo:proxy123`.

To add the rotation link to a line, write it in square brackets at the end of the line.

![GoLogin Import proxies window with the list of allowed formats marked](https://media1.xproxy.io/docs/integrations/app-gologin-bulk-v2.webp)

> The picture lists every format GoLogin accepts, including a link in square brackets at the end of a line.

**Step 6: Check it works**

1. In GoLogin, test the proxy. It should say the proxy works.
2. Open the profile and visit the [XProxy leak test](https://xproxy.io/proxy-leak-test). The IP it shows must be the **Public IP** of that proxy in **Proxy Management**.
3. Change the IP: click **LINK** in the **Rotation** column (or **Rotate**), wait about 10 seconds and reload the test page. The IP changes.

![Proxy Management table with the Public IP of the first proxy marked (demo data)](https://media1.xproxy.io/docs/integrations/int-publicip-v1.webp)

> Shows your own IP, or another one? The profile is not using the proxy. See the table below.

**Step 7: Match the profile to the IP**

Optional, but recommended. In the GoLogin profile:

- **Time zone and location:** set both from the IP (often called *Auto* or *Based on IP*).
- **WebRTC:** choose *Replace* / *Altered* or *Disabled*. Do not use *Real*: it can show your own IP.
- **TCP/IP OS** (Premium plan or higher): in XProxy, tick the proxies, open **Batch → Change TCP/IP OS Profile** and pick the same OS as the profile.

More about the last one: [TCP OS Spoofing](https://xproxy.io/document/tcp-os-spoofing).

> Keep the profile's OS, time zone and language telling the same story as the IP.

**What's next?**

Change the IP on a timer or from code: [How to change / rotate IP](https://xproxy.io/document/how-change-rotate-ip). Other proxy formats: [Copy a proxy in the right format](https://xproxy.io/document/how-use-proxy-format-http-socks5).

## Something not working?

| You see | What to do |
| --- | --- |
| GoLogin says the proxy does not work, or times out | Check that your computer can reach the address in the line. A **LAN only** address works only on your own network: export again with **Public address** or **VPS relay** ([public access](https://xproxy.io/document/how-public-access-xproxy)). Also check that the port is the one shown in **Proxy Management**. |
| Login failed, or "407 Proxy Authentication Required" | Copy the proxy again after saving **Proxy Settings → Login**, and check for spaces before or after the text. Using **Whitelist IP** instead of a password? Add the public IP of the computer that runs the app. |
| The proxy connects right after you paste it, then fails | The type in the app must match what you exported. The **GoLogin / AdsPower** preset is HTTP, the **Multilogin / VMLogin** preset is SOCKS5. Or export again with the other **Protocol**. |
| The test page shows your own IP | The profile is not using the proxy. Open its proxy settings, make sure the proxy is selected, and set WebRTC to *Replace* or *Disabled*. Test again at the [XProxy leak test](https://xproxy.io/proxy-leak-test). |
| The rotation link does nothing, or the IP stays the same | The modem needs a few seconds to reconnect, so wait about 10 seconds. Sometimes the carrier gives back the same IP: rotate again. Paste the link in a browser tab: it should answer `command_sent`. Profiles that share one proxy share its IP too, so rotating changes it for all of them. |
| There is no **Change IP** button for the proxy | Edit the proxy and check that the **Change IP** field holds the rotation link. You can always rotate from **Proxy Management** in XProxy. |

---

Source: https://xproxy.io/document/integrating-gologin-with-xproxy
