# Integrating Multilogin with XProxy

> For AI tools: this is the Markdown copy of https://xproxy.io/document/integrating-multilogin-with-xproxy. Every XProxy guide has one at its URL + `.md`; the index of all guides is https://xproxy.io/llms.txt.

Copy an XProxy proxy into a Multilogin profile and check it works.

Use an XProxy mobile proxy in Multilogin. Copy it from your panel, paste it into a profile and check it. It takes about 5 minutes.

**You need:** an XProxy panel with a working modem, and Multilogin on your computer. Multilogin can run on another computer than XProxy: choose **Public address** or **VPS relay** when you export.

**Step 1: Open Export Proxy in your XProxy panel**

Open your XProxy panel in a browser and click **Proxy Management** in the left menu.

Click **Export Proxy**.

![XProxy panel, Proxy Management page with the Export Proxy button marked (demo data)](https://media1.xproxy.io/docs/integrations/int-export-1-v1.webp)

> Can't open the panel? See [how to open your dashboard](https://xproxy.io/document/how-access-dashboard-xproxy).

**Step 2: Copy your proxies**

1. Next to **Preset**, pick **Multilogin / VMLogin**. It uses **SOCKS5**. Each line is one proxy: `host:port:user:pass`.
2. Under **Address**, pick how Multilogin reaches your box: **LAN only** on the same network, **Public address** or **VPS relay** from anywhere else.
3. Click **Copy All**.

**user** and **pass** are your login from **Proxy Settings → Login**.

![Export Proxies window with the Preset list, the Address list and the Copy All button marked (demo data)](https://media1.xproxy.io/docs/integrations/int-export-2-v1.webp)

> Only need one proxy? Click it in the table: it copies in the same format. Not sure which address? See [how to copy a proxy](https://xproxy.io/document/how-use-proxy-format-http-socks5).

**Step 3: Add the proxy to a profile**

In Multilogin create a profile, or open an existing one, and scroll to the **Proxy** section.

1. Choose **Custom** and set the protocol to **SOCKS5**. That is what the **Multilogin / VMLogin** preset gives you.
2. Enter **Host**, **Port**, **Username** and **Password** from your line. If you see a single field, paste the whole line: `host:port:user:pass`.
3. Click **Check proxy**. It should say **Proxy check passed**.
4. Save the profile.

> Multilogin has no field for a rotation link here. Change the IP from XProxy instead: the Rotate button, a timer or the API. See [How to change / rotate IP](https://xproxy.io/document/how-change-rotate-ip).

**Step 4: Check it works**

1. In Multilogin, click **Check proxy**. It should say the proxy works.
2. Open the profile and visit the [XProxy leak test](https://xproxy.io/proxy-leak-test). The IP it shows must be the **Public IP** of that proxy in **Proxy Management**.
3. Change the IP: click **Rotate** in **Proxy Management** (or use a timer or the API), wait about 10 seconds and reload the test page. The IP changes.

![Proxy Management table with the Public IP of the first proxy marked (demo data)](https://media1.xproxy.io/docs/integrations/int-publicip-v1.webp)

> Shows your own IP, or another one? The profile is not using the proxy. See the table below.

**Step 5: Match the profile to the IP**

Optional, but recommended. In the Multilogin profile:

- **Time zone and location:** set both from the IP (often called *Auto* or *Based on IP*).
- **WebRTC:** choose *Replace* / *Altered* or *Disabled*. Do not use *Real*: it can show your own IP.
- **TCP/IP OS** (Premium plan or higher): in XProxy, tick the proxies, open **Batch → Change TCP/IP OS Profile** and pick the same OS as the profile.

More about the last one: [TCP OS Spoofing](https://xproxy.io/document/tcp-os-spoofing).

> Keep the profile's OS, time zone and language telling the same story as the IP.

**What's next?**

Change the IP on a timer or from code: [How to change / rotate IP](https://xproxy.io/document/how-change-rotate-ip). Other proxy formats: [Copy a proxy in the right format](https://xproxy.io/document/how-use-proxy-format-http-socks5).

## Something not working?

| You see | What to do |
| --- | --- |
| Multilogin says the proxy does not work, or times out | Check that your computer can reach the address in the line. A **LAN only** address works only on your own network: export again with **Public address** or **VPS relay** ([public access](https://xproxy.io/document/how-public-access-xproxy)). Also check that the port is the one shown in **Proxy Management**. |
| Login failed, or "407 Proxy Authentication Required" | Copy the proxy again after saving **Proxy Settings → Login**, and check for spaces before or after the text. Using **Whitelist IP** instead of a password? Add the public IP of the computer that runs the app. |
| The proxy connects right after you paste it, then fails | The type in the app must match what you exported. The **GoLogin / AdsPower** preset is HTTP, the **Multilogin / VMLogin** preset is SOCKS5. Or export again with the other **Protocol**. |
| The test page shows your own IP | The profile is not using the proxy. Open its proxy settings, make sure the proxy is selected, and set WebRTC to *Replace* or *Disabled*. Test again at the [XProxy leak test](https://xproxy.io/proxy-leak-test). |
| The rotation link does nothing, or the IP stays the same | The modem needs a few seconds to reconnect, so wait about 10 seconds. Sometimes the carrier gives back the same IP: rotate again. Paste the link in a browser tab: it should answer `command_sent`. Profiles that share one proxy share its IP too, so rotating changes it for all of them. |
| **Proxy check failed** | Check the host, the port and the login for typos or spaces, and that the protocol is SOCKS5. If it still fails, test the same proxy outside Multilogin. |

---

Source: https://xproxy.io/document/integrating-multilogin-with-xproxy
