# Installing Dongles

> For AI tools: this is the Markdown copy of https://xproxy.io/document/installing-dongles. Every XProxy guide has one at its URL + `.md`; the index of all guides is https://xproxy.io/llms.txt.

Put a SIM in each dongle, plug them into a powered USB hub, check the panel finds them, test a proxy and change labels.

Plug in your 4G dongles, check that XProxy sees them, and test a proxy.

**You need:** an XProxy box (or an Ubuntu PC with XProxy) that is on, a USB hub with its own 12 V adapter, your dongles, and a **micro** SIM with mobile data for each (pictures show the XH22). XM16, XM55 and XCPE-25 take a **standard** SIM: see their [kit guides](https://xproxy.io/document/xproxy-kits).

**Step 1: Put a SIM in each dongle**

Use a **micro SIM** with mobile data, PIN lock off.StandardMicroNano

1. Take a dongle.
2. Turn it over, slide the SIM cover off.
3. Put in the SIM: gold contacts down, cut corner at the back.
4. Push it toward the USB plug and close the cover.
5. Turn it back and pull off the USB cap.

![An XProxy XH22 dongle on a desk, front side up](https://media1.xproxy.io/docs/dongles/sim-1.webp)

> Do the same for every dongle. Put SIMs in or take them out only while the hub is off.

**Step 2: Plug the dongles into the hub**

Use a **powered USB hub**. Push a dongle all the way into a free port. Go in the order of the number labels.

Fill the ports one after the other. The number on a dongle is its **label**: it tells you which dongle is which in your dashboard.

![The dongle with label 20 being plugged into a free port of the USB hub, the other dongles waiting on the desk](https://media1.xproxy.io/docs/dongles/hub-1.webp)

> Never plug dongles straight into the XProxy box, and never run 4 or more on a hub without its own 12 V adapter. **Do not peel off the number labels.**

**Step 3: Connect the hub and switch it on**

Plug the hub's USB cable into the hub, then into a USB port on the XProxy box (or on your PC).

Plug the hub's 12 V adapter into a socket and its round plug into the hub. Slide the switch to **ON**. The hub's red light comes on. Within about a minute every dongle light blinks green.

![The hub next to the XProxy box with the USB cable plugged into the XProxy box](https://media1.xproxy.io/docs/dongles/pw-1.webp)

> **Kit owners, do not mix up the two adapters.** The 12 V adapter is for the hub only. Plugged into the XProxy box, it can damage it.

**Step 4: Open Proxy Management**

On a computer or phone in the same network, open your XProxy dashboard. In the left menu, click **Proxy Management**.

Every dongle that the box can see gets its own row. New dongles show up within 10 to 30 seconds.

![XProxy dashboard: Proxy Management in the left menu and the first rows of the dongle list (demo data)](https://media1.xproxy.io/docs/dongles/p-open.webp)

> Can't open the dashboard? See [how to open your dashboard](https://xproxy.io/document/how-access-dashboard-xproxy).

**Step 5: Find your dongle**

One row is one dongle. These columns tell you the most:

- **Pos**: its position number.
- **Device Info**: the dongle model.
- **Label**: the number on the dongle's sticker.
- **Provider**: the mobile carrier and the signal bars.

A green row means the dongle has data. A red row has a problem: see the next step.

![Proxy Management with the Pos, Device Info, Label and Provider columns marked, one dongle per row (demo data)](https://media1.xproxy.io/docs/dongles/p-row.webp)

**Step 6: A dongle is red or missing**

1. A row that says **Disconnected** has a problem. Click **What's wrong?**.
2. The panel says what it found and what to do. Often: press **Reset USB connection** and wait about 30 seconds. Still red? Unplug the dongle, wait 10 seconds, use another USB port.

![A red dongle row with Disconnected and the What's wrong? link marked (demo data)](https://media1.xproxy.io/docs/dongles/p-wrong.webp)

> No row at all? Push the dongle in all the way, or try another port. Still nothing? [Contact support](https://t.me/xproxyio) for free help with drivers. On an Ubuntu PC, install the dongle's driver first.

**Step 7: Find the proxy address and login**

Each dongle has its own port: the first is `4001`, the second `4002`, and so on. HTTP and SOCKS5 share it. Find the address in the row. To see the login, click **Proxy Settings** above the list.

Open the **Login** tab. When proxy authentication is on, the proxies use the username and password from there.

![Proxy Management with the Proxy Settings button and the proxy address of the first dongle marked (demo data)](https://media1.xproxy.io/docs/dongles/p-addr.webp)

> Boxes upgraded from older versions may still use separate ports (HTTP `4001+`, SOCKS5 `5001+`). Always use the port shown in the row.

**Step 8: Test one proxy**

On any computer in the same network, run this in a terminal:

Terminal

```
curl -x socks5h://USER:PASS@&lt;xproxy-ip>:4001 https://api.ipify.org
```

Use your login, the box's address and the dongle's port.

You should see a mobile carrier IP, like the **Public IP** of that row.

![The proxy address and the Public IP of a dongle row marked (demo data)](https://media1.xproxy.io/docs/dongles/p-ports.webp)

> Your home IP instead? Then the request skips the dongle. Check it shows as connected, then switch the hub off and on or re-insert the SIM.

**Step 9: What a label is**

The **label** is a number on the dongle's sticker.

The panel shows it in the **Label** column, so you know which dongle a row is.

- 11 to 254. It is the 3rd number of the dongle's address: label **11** is `192.168.11.1`.
- One XProxy system: one label per dongle. Avoid 0 and 1 (home routers).
- Shop dongles already have labels.

![Close view of dongles in the hub, each with its number label such as 11, 12 and 13](https://media1.xproxy.io/docs/dongles/lab.webp)

**Step 10: Open Dongle Devices**

Only do this when two dongles share a label, or you want your own numbers. The panel can set the label for Huawei, ZTE and XProxy XH22 dongles. Plug in **one dongle at a time**.

1. In the left menu, open **Device Settings**, then **Dongle Devices**.
2. In the **Label** column, click the small pencil next to the number.

![The left menu with Device Settings open and Dongle Devices marked (demo data)](https://media1.xproxy.io/docs/dongles/l-menu.webp)

**Step 11: Enter the new label**

Type the new number in **New Label Number** and click **Change**.

The panel restarts the dongle by itself. Wait for it to come back, then check the new number in the Label column and write it on the dongle's sticker.

![The Label Changer window with the New Label Number box and the Change button marked (demo data)](https://media1.xproxy.io/docs/dongles/l-dialog.webp)

> Dongle not detected, or the label does not change? Check its password settings first: some dongles need a password change before the label can be set. Still failing? [Change it by hand](#manual-label).

**What's next?**

Set how each dongle changes its IP with **Rotation Settings**: [Change / rotate IP](https://xproxy.io/document/how-change-rotate-ip).

## Change a label by hand

The panel could not change the label? Set it on the dongle's own web page from a Windows PC. Pick your dongle.

**Step 1: Open the dongle panel (Huawei)**

Plug the dongle into a Windows PC. Open `192.168.8.1` or `192.168.1.1` in a browser.

If the dongle asks you to set a password on first use, use `admin` and `admin123`.

![Huawei dongle panel, System, Modify Password page](https://media1.xproxy.io/docs/dongles/huawei-pass.webp)

**Step 2: Change the gateway (Huawei)**

Click **Advanced**. Open **Router**, then **DHCP**.

Change the third number of the **LAN IP address** to your label. For label 11 it reads `192.168.11.1`. Click **Save**.

![Huawei dongle panel, Advanced, Router, DHCP: the LAN IP address and the Save button marked](https://media1.xproxy.io/docs/dongles/huawei-dhcp.webp)

> Plug the dongle back into the hub. The Label column in Proxy Management shows the new number.

**Step 3: Open the dongle panel (ZTE)**

Plug the dongle into a Windows PC. Open `192.168.0.1` in a browser.

Click **Advanced Settings** (red box).

![ZTE dongle panel home page with Advanced Settings boxed in red](https://media1.xproxy.io/docs/dongles/zte-adv.webp)

**Step 4: Set the address (ZTE)**

Open the **Router** tab. Set **IP Address** to `192.168.11.1` (11 is your label) and **DHCP IP Pool** to `192.168.11.100` to `192.168.11.200` (red boxes).

Click **Apply**.

![ZTE dongle panel, Advanced Settings, Router: IP address, DHCP IP pool and the Apply button marked](https://media1.xproxy.io/docs/dongles/zte-router.webp)

> The page says the setting can only be changed while the modem is disconnected. If Apply is refused, disconnect the dongle from mobile data first.

**Step 5: Set a password if asked (ZTE)**

If the dongle asks for a password, click **Modify Login Password** (top right) and set `admin` and `admin`. Click **Apply**.

Then plug the dongle back into the hub. The Label column in Proxy Management shows the new number.

![ZTE dongle panel, Login Password page with the password boxes marked](https://media1.xproxy.io/docs/dongles/zte-pass.webp)

## Something not working?

| You see | What to do |
| --- | --- |
| No light on the hub | Check the 12 V adapter is plugged in and the hub is switched on. |
| One dongle light stays off | Push the dongle all the way into the hub, or try another port. |
| A dongle has no row in Proxy Management | Wait 30 seconds. Then check the dongle is pushed in, and try another hub port. Still nothing? [Contact support](https://t.me/xproxyio). |
| A row says Disconnected | Click **What's wrong?** and follow the steps. Often: **Reset USB connection**, wait 30 seconds, then try another USB port. |
| The test shows your home IP | Check the dongle is connected in Proxy Management. Switch the hub off and on, or re-insert the SIM. |
| The label does not change | Plug in one dongle at a time and check its password settings, or [change it by hand](#manual-label). |

---

Source: https://xproxy.io/document/installing-dongles
